[localhost]

hey guys,
my tvh does not find any free adapters after watching a movie from my local drive after 30 minutes or so.
I tried to use unload dvb modules in tvh settings but I haven't had success so far.

Kodi Leia (Libreelec)
Tvh 4.2
DVBSky S960 V2 USB

dmesg | grep dvb

Code:


[    3.807361] usb 3-2: dvb_usb_v2: found a 'DVBSky S960/S860' in warm state
[    3.807456] usb 3-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[    3.807465] dvbdev: DVB: registering new adapter (DVBSky S960/S860)
[    3.808671] usb 3-2: dvb_usb_v2: MAC address: 00:17:42:54:96:0c
[    3.913353] Registered IR keymap rc-dvbsky
[    3.914252] rc rc0: lirc_dev: driver dvb_usb_dvbsky registered at minor = 0, scancode receiver, no transmitter
[    3.914256] usb 3-2: dvb_usb_v2: schedule remote query interval to 300 msecs
[    3.914258] usb 3-2: dvb_usb_v2: 'DVBSky S960/S860' successfully initialized and connected
[    3.914284] usbcore: registered new interface driver dvb_usb_dvbsky
[    4.151021] m88ds3103 1-0068: downloading firmware from file 'dvb-demod-m88ds3103.fw'


lsmod output

Code:


Module Size Used by
nvidia_modeset 1097728 5
rc_dvbsky 16384 0
snd_hda_codec_hdmi 49152 1
nvidia 14290944 294 nvidia_modeset
ts2020 20480 1
8021q 24576 0
snd_hda_codec_realtek 81920 1
dvb_usb_dvbsky 20480 1
snd_hda_codec_generic 69632 1 snd_hda_codec_realtek
m88ds3103 28672 2 dvb_usb_dvbsky
intel_powerclamp 16384 0
intel_rapl 20480 0
dvb_usb_v2 36864 1 dvb_usb_dvbsky
rc_core 36864 4 rc_dvbsky,dvb_usb_v2,dvb_usb_dvbsky
i2c_mux 16384 1 m88ds3103
dvb_core 143360 3 dvb_usb_v2,m88ds3103,dvb_usb_dvbsky
snd_hda_intel 36864 3
snd_hda_codec 106496 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
snd_hwdep 16384 1 snd_hda_codec
snd_hda_core 65536 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
pcc_cpufreq 16384 0
uvesafb 28672 1


 
so I entered dvb_usb_v2 m88ds3103 dvb_usb_dvbsky into unload option but still so luck.
Any more guesses?

Thanks in advance

[black_eagle]

Would it help to turn on 'idle scan' so that TVH keeps the tuners active ?

[localhost]

Idle scan is already active in tuner settings at TVH.
Any more guesses?