2008-12-23, 10:54
2008-12-23, 23:11
i found something because of the double "ok" / "up/down" problem.
seems like that different usb ports gives different results. i have onboard (at the back) ports who have this problem. the front usb port (who is connected to a board usb port) doesnt have this problem.
very strange... any hardware-/usb specialist here who can confirm this?
is it possible to "tune" a usbport to 1.1 or something like that?
btw. i have a nforce 730 board
seems like that different usb ports gives different results. i have onboard (at the back) ports who have this problem. the front usb port (who is connected to a board usb port) doesnt have this problem.
very strange... any hardware-/usb specialist here who can confirm this?
is it possible to "tune" a usbport to 1.1 or something like that?
btw. i have a nforce 730 board
2008-12-24, 01:40
Hi I am a little confused as to what is needed to run the XBOx 1.0 remote with my HPTC. If I connect the Xbox remote sensor to my computer via USB connection. Install the proper drivers either the programs mentioned in this threads or via XBCD http://www.redcl0ud.com/ then can I use my Xbox remote with my HPTC like I do on Xbox?
2008-12-24, 08:19
rimmi2002 Wrote:Hi I am a little confused as to what is needed to run the XBOx 1.0 remote with my HPTC. If I connect the Xbox remote sensor to my computer via USB connection. Install the proper drivers either the programs mentioned in this threads or via XBCD http://www.redcl0ud.com/ then can I use my Xbox remote with my HPTC like I do on Xbox?
yes thats the idea, but in reality it will work, but not as responsively as the xbox is right now (hope the lagginess get looked into)
2008-12-27, 01:38
So.. I have been using this great program/driver for a couple of days now, and for the most parts it works like a charm, but I do have one strange issue. For instance when I play music and I want to skip to the next song on the album I press the "skip +" button on the remote, but it get registerd as "skip -". Anyone else run in to this problem?
2008-12-28, 23:03
MoDe2006 Wrote:someone have test driver vista?still cant get to work.. im going to just give up and maybe look for a new remote
2008-12-30, 19:22
Je ne comprend pas pourquois il y as autans de probleme avec l'installation de IRXBOX1.0, c'est tellement simple !!.
1- Connection du Dongle sur un port USB
2 - installation des drivers fournis avec le fichier d'installation
3 - installation du logiciel IRXBOX (placer tt les fichiers dans le rep XBMC si vous voulez que le soft demare automatiquement XBMC puis editer le .conf Autostart, tt les reglage ce font dans la barre de tache)
4- utilisez le keymap fournis pour ajouter d'autre fonction a votre télécommande.
Nt: On constate un lag dans l'action telecommande avec certains SKINS et la seul solution est de changer de skin.
VERY EASY
1- Connection du Dongle sur un port USB
2 - installation des drivers fournis avec le fichier d'installation
3 - installation du logiciel IRXBOX (placer tt les fichiers dans le rep XBMC si vous voulez que le soft demare automatiquement XBMC puis editer le .conf Autostart, tt les reglage ce font dans la barre de tache)
4- utilisez le keymap fournis pour ajouter d'autre fonction a votre télécommande.
Nt: On constate un lag dans l'action telecommande avec certains SKINS et la seul solution est de changer de skin.
VERY EASY
2008-12-30, 20:58
MoDe2006 Wrote:Je ne comprend pas pourquois il y as autans de probleme avec l'installation de IRXBOX1.0, c'est tellement simple !!.
1- Connection du Dongle sur un port USB
2 - installation des drivers fournis avec le fichier d'installation
3 - installation du logiciel IRXBOX (placer tt les fichiers dans le rep XBMC si vous voulez que le soft demare automatiquement XBMC puis editer le .conf Autostart, tt les reglage ce font dans la barre de tache)
4- utilisez le keymap fournis pour ajouter d'autre fonction a votre télécommande.
Nt: On constate un lag dans l'action telecommande avec certains SKINS et la seul solution est de changer de skin.
VERY EASY
yep that helped.... me no speak french or whatever that is...
lol,
2008-12-30, 21:41
MoDe2006 Wrote:Je ne comprend pas pourquois il y as autans de probleme avec l'installation de IRXBOX1.0, c'est tellement simple !!.Translation...
1- Connection du Dongle sur un port USB
2 - installation des drivers fournis avec le fichier d'installation
3 - installation du logiciel IRXBOX (placer tt les fichiers dans le rep XBMC si vous voulez que le soft demare automatiquement XBMC puis editer le .conf Autostart, tt les reglage ce font dans la barre de tache)
4- utilisez le keymap fournis pour ajouter d'autre fonction a votre télécommande.
Nt: On constate un lag dans l'action telecommande avec certains SKINS et la seul solution est de changer de skin.
VERY EASY
MoDe2006 Wrote:I don't understand why there are so many isuses with installing IRXBOX1.0, it's so easy!!
1 - Connect the dongle on a USB port
2 - Install the drivers provided with the installation file
3 - Install the IRXBOX software (put all files in the XBMC folder if you want the software to automatically start XBMC then edit the .conf Autostart all settings are done in the task bar)
4 - Use the provided keymaps to add extra functionality to your remote
Note : You can notice some lag when using the remote with some skins and the only solution is to switch skins
VERY EASY
2008-12-30, 22:46
well for some reason it would not install a driver for the usb so I'm using my PS3 remote and it works and a lot simpler to install and set up, plus the key board works too.... thanks anyway....
2009-01-05, 19:07
djerock Wrote:yep that helped.... me no speak french or whatever that is...Yes, french it is.
Please note that I'm a Xbox user, so I don't know (so far) the PC version. In a few words :
He doesn't understand why so many people encounter so many problems, because it's really simple :
1- connect your dongle on USB port
2- install the drivers (they're in the install file)
3- install IRXBOX. If you want it to start automatically XBOX, put all the files in the XBMC dir and then edit .conf Autostart.
All settings are in the Task Bar.
4- use the keymap file provided to add or modify the button settings.
Please note that some skins may cause lags in the remote use. The only known solution is to change the skin.
2009-01-10, 18:29
For me the fix to lagginess in the remote response was to disable in device manager the other "USB Device" that appears when the DVD Dongle is installed.
In the instructions for the driver redcl0ud provides, this is the other device for which there is no driver.
Hope this helps somebody else out
Nick
In the instructions for the driver redcl0ud provides, this is the other device for which there is no driver.
Hope this helps somebody else out
Nick
2009-01-12, 01:57
nickb834 Wrote:For me the fix to lagginess in the remote response was to disable in device manager the other "USB Device" that appears when the DVD Dongle is installed.
In the instructions for the driver redcl0ud provides, this is the other device for which there is no driver.
Hope this helps somebody else out
Nick
Actually it turns out the real fix was to make sure that after the XBCDRC driver was installed that the XBCDRC client isn't running, otherwise you'll have two clients running trying to interpret the RC5 commands from the remote and hence the lag we've suffered.
Make sure you only have the IRXBOX client running in your systray.
In doing so I have absolutely no lag whatsoever :-)
2009-01-12, 08:53
personally, im confised why so many people are using the XBCDRC driver , and not the modified drivers from mode2006?
if you installed the drivers provided, then you would not have to disable the incorrect client i suppose?
but i guess, you have a point, if users are installing 2 x packages to support one device, then some conflicts would be possible.
my 2 x cents worth,
Dam0
if you installed the drivers provided, then you would not have to disable the incorrect client i suppose?
but i guess, you have a point, if users are installing 2 x packages to support one device, then some conflicts would be possible.
my 2 x cents worth,
Dam0
