2009-01-17, 03:06
maybe someone who use xbmc live with antec case and rm200 remote can explain how he get lirc working pls...
dirtylion Wrote:i always get the msg
cvs -d:pserver:[email protected]:/cvsroot/lirc login
cvs [login aborted]: cannot get working directory: No such file or directory
someone can help me pls
dirtylion Wrote:maybe someone who use xbmc live with antec case and rm200 remote can explain how he get lirc working pls...
philippeb06 Wrote:Hello and thank you for your great help!
However, I'd like to add some comments as you solution did not work "out of the box" for me.
I am using an Antec Fusion Remote Black with a RM200 VERIS remote and add some problems getting the two lircd working together.
I ran two irrecord, the first one on /dev/lirc0 putting configuration on /etc/lirc/remote1.conf about the pad and the numbers on remote and the second one on /dev/lirc1 putting configuration on /etc/lirc/remote2.conf about the other keys.
Code:sudo irrecord /etc/lirc/remote1.conf -d /dev/lirc0 --disable-namespace
sudo irrecord /etc/lirc/remote2.conf -d /dev/lirc1 --disable-namespace
Once this done, I ran the following commands:
Code:sudo /usr/local/sbin/lircd --driver=default --device=/dev/lirc0 --pidfile=/var/run/lirc0.pid --listen=8765 /etc/lirc/remote1.conf
sudo /usr/local/sbin/lircd --driver=default --device=/dev/lirc1 --pidfile=/var/run/lirc1.pid --connect localhost:8765 --output=/dev/lircd /etc/lirc/remote2.conf
This is now working and the irw mixes the two parts of the remote.
Hope it will help
Philippe
sudo dpkg-reconfigure lirc-modules-source
Quote:bmc@htpc:~/lirc$ sudo dpkg-reconfigure lirc-modules-source
Removing all DKMS Modules
Done.
Adding Module to DKMS build system
Doing initial module build
Error! Build of lirc_imon.ko failed for: 2.6.24-23-generic (i686)
Consult the make.log in the build directory
/var/lib/dkms/lirc/0.8.3~pre1/build/ for more information.
Installing initial module
Error! Could not locate lirc_atiusb.ko for module lirc in the DKMS tree.
You must run a dkms build for kernel 2.6.24-23-generic (i686) first.
Done.
xbmc@htpc:~/lirc$
begin remote
name rm200d1.conf
bits 64
eps 30
aeps 100
one 0 0
zero 0 0
gap 139998
ignore_mask 0x0000000000000301
min_repeat 1
toggle_bit 0
begin codes
KEY_EXIT 0x2881d5b700000201 # AppExit FAILS
KEY_POWER 0x289115b700000201 # Power FAILS
MouseKeyboard 0x299115b700000201 # Mouse/Keyboard FAILS
KEY_1 0x0200001e00000201 # 1 WORKS
KEY_2 0x0200001f00000201 # 2 WORKS
KEY_UP 0x0100800000000201 # Pad Up WORKS
KEY_DOWN 0x01007f0000000201 # Pad Down WORKS
end codes
end remote
NismoC32 Wrote:Code:sudo dpkg-reconfigure lirc-modules-source
Can anyone shed some light on what's causing this.
Quote:Error! Could not locate lirc_atiusb.ko for module lirc in the DKMS tree.
You must run a dkms build for kernel 2.6.24-23-generic (i686) first.
Done.
todderod Wrote:Anyone got any idea what could be causing this behaviour?
begin remote
name IMON_RM200
bits 32
eps 30
aeps 100
one 0 0
zero 0 0
post_data_bits 32
post_data 0x0
gap 200000
toggle_bit 0
begin codes
KNOB_LEFT 0x01000080
KNOB_RIGHT 0x0100007F
KNOB_UP 0x01008000
KNOB_DOWN 0x01007F00
BACKSPACE 0x0200002A
SELECT 0x0200002C
LMENU 0x02800000
RMENU 0x02000065
LMOUSE 0x01010000
RMOUSE 0x01000000
ESCAPE 0x02000029
ENTER 0x02000028
NUM_0 0x02000027
NUM_1 0x0200001E
NUM_2 0x0200001F
NUM_3 0x02000020
NUM_4 0x02000021
NUM_5 0x02000022
NUM_6 0x02000023
NUM_7 0x02000024
NUM_8 0x02000025
NUM_9 0x02000026
NUM_STAR 0x02200025
NUM_HASH 0x02200020
end codes
end remote
begin remote
name IMON_RM200
bits 64
eps 30
aeps 100
one 0 0
zero 0 0
gap 195989
min_repeat 2
toggle_bit 0
begin codes
APP_EXIT 0x288195B700000201
POWER 0x289115B700000201
RECORD 0x298115B700000201
PLAY 0x2A8115B700000201
EJECT 0x29B195B700000201
FAST_REW 0x2A8195B700000201
PAUSE 0x2A9115B700000201
FAST_FWD 0x2B8115B700000201
SKIP_PREV 0x2B9115B700000201
STOP 0x2B9715B700000201
SKIP_NEXT 0x298195B700000201
MOUSE_KEYB 0x299115B700000201
APP_LAUNCH 0x29B715B700000201
GO 0x2AB195B700000201
DISC 0x299395B700000201
TASKSW 0x2A9395B700000201
MUTE 0x2B9595B700000201
VOL_UP 0x28A395B700000201
VOL_DOWN 0x28A595B700000201
CHAN_UP 0x289395B700000201
CHAN_DOWN 0x288795B700000201
TIMER 0x2B8395B700000201
VIDEOS 0x2B8515B700000201
MUSIC 0x299195B700000201
PICTURES 0x2BA115B700000201
TV 0x28A515B700000201
BOOKMARK 0x288515B700000201
THUMBNAIL 0x2AB715B700000201
ZOOM 0x29A595B700000201
FULLSCREEN 0x2AA395B700000201
DVD 0x29A395B700000201
MENU 0x2BA395B700000201
SUBTITLES 0x298595B700000201
AUDIO 0x2B8595B700000201
end codes
end remote
Temar Wrote:The lirc_atiusb module failed to build (probably because the old atiusb code is incompatible with the new lirc_dev code). I had the same problem and cleaned up all the devices I don't need.
I could send you my cleaned up code but I patched it for my 045e:0039 device. Which device do you have?
Quote:/usr/local/sbin/lircd --driver=default --device=/dev/lirc0 --pidfile=/var/run/lirc0.pid --listen=8765 /etc/lirc_imon.0.confThe other problem is that XBMC doesn't pick up on any buttons. (Any chance you can post your Lircmap.xml file?)
/usr/local/sbin/lircd --driver=default --device=/dev/lirc1 --pidfile=/var/run/lirc1.pid --connect localhost:8765 --output=/dev/lircd /etc/lirc_imon.1.conf
perl -e 'print pack "H*", "80000000091e0088"' > /dev/lcd0
Quote:sudo apt-get install xbmc