Problem with 1366*768 Resolution
#1
Firt Hi and sorry for my english, I'm from spain.

My problem is: My HTPC resolution is set at 1366*768 and if a try that resolution on the MediaStream skin, all the graphics are very big and i can see only half of the xbmc, the rest its out of the tv.

any solution?.

thanks in advance.
Reply
#2
Set it to auto.
Or, if you can, chose OK/Yes when asked if you want to keep that res and restart XBMC.
 
  • Intel NUC Kit DN2820FYKH ~ Crucial DDR3L SO-DIMM 4GB ~ SanDisk ReadyCache 32GB SSD ~ Microsoft MCE model 1039 RC6 remote
Reply
#3
If i set to auto, xbmc dont use my htpc resolution thats the problem, i'll try to restart after set to 1366*768. Thank you
Reply
#4
Probably when set to auto it will use 720p.
Also try video calibration.
 
  • Intel NUC Kit DN2820FYKH ~ Crucial DDR3L SO-DIMM 4GB ~ SanDisk ReadyCache 32GB SSD ~ Microsoft MCE model 1039 RC6 remote
Reply
#5
My plasma has that same 1366x768 resolution and with video set to 720p MediaStream looks very good. Actually, setting it to 720p is the ONLY way I have to make it look good Smile.
Reply
#6
Yap me too, my HDTV is 1366*768 and i always use 720p cause it seems to be the best atleast to me.
 
  • Intel NUC Kit DN2820FYKH ~ Crucial DDR3L SO-DIMM 4GB ~ SanDisk ReadyCache 32GB SSD ~ Microsoft MCE model 1039 RC6 remote
Reply
#7
I finally fix the problem, cloding and opening xbmc, thank you
Reply

Logout Mark Read Team Forum Stats Members Help
Problem with 1366*768 Resolution0