2009-07-03, 22:27
Hi !
That's already what is configued... moreover no way to pull level up of iec958 ... it remains to 0
Matt
That's already what is configued... moreover no way to pull level up of iec958 ... it remains to 0
Matt
msevestre Wrote:Hi !
That's already what is configued... moreover no way to pull level up of iec958 ... it remains to 0
Matt
Quote:(T: XBMCLive)root@XBMCLive:/media/Movies/divx/Nous# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC662 Analog [ALC662 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: ALC662 Digital [ALC662 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
(T: XBMCLive)root@XBMCLive:/media/Movies/divx/Nous# aplay -L
default:CARD=NVidia
HDA NVidia, ALC662 Analog
Default Audio Device
front:CARD=NVidia,DEV=0
HDA NVidia, ALC662 Analog
Front speakers
surround40:CARD=NVidia,DEV=0
HDA NVidia, ALC662 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia,DEV=0
HDA NVidia, ALC662 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia,DEV=0
HDA NVidia, ALC662 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia,DEV=0
HDA NVidia, ALC662 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia,DEV=0
HDA NVidia, ALC662 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=NVidia,DEV=0
HDA NVidia, ALC662 Digital
IEC958 (S/PDIF) Digital Audio Output
null
Discard all samples (playback) or generate zero samples (capture)
donabi Wrote:asrock and zotac is nearly the same.The biggest problem for lots of people is that the zotac doesn't have wake-on-usb, so if you were planning on using a usb remote it will not be able to pull it out of standby.
the zotac has two more connectors at the rear.
e-sata and coaxial-digital-out.
the asrock is ready-to-use. case, dvd-drive. but not as flexible as the zotac.
powerconsumption:
you have to look for the TDP of the E7400.
ad the difference to the zotac + 10% or something.
that should be near the real results, i guess.
stogiesam88 Wrote:The biggest problem for lots of people is that the zotac doesn't have wake-on-usb, so if you were planning on using a usb remote it will not be able to pull it out of standby.
snoxbox Wrote:Not so anymore. There is a new revision of the board that enables wake from USB. This is the board that is being chipped currently.Are you sure? I've been hearing this from people on the forum, but I haven't seen the new revision actually for sale. Also, when I emailed zotac about this on 6/26 they said there was no information about when the new board was shipping. I'm guessing the pre-order on amazon is for the new revision though.
msevestre Wrote:Hi !
could anybody help me on my problem ? : http://forum.xbmc.org/showpost.php?p=362...stcount=48
I'm still without success. I updated ALSA to 1.0.20 and this changed nothing to the results. I reset Audio setting in BIOS to Internal+External codec, and HDMI audio reappeared in aplay command return.
IEC958 is unmuted... but there's no sound on my amplifier side (correctly setup)
Edit: audio is always going out from regular audio jack...
Regards
Matt