Zotac IONITX-A Atom N330 Nvidia Ion?

idlehands Wrote:You get suspend and wake with remote to work? I have an MCE receiver plugged in front and have the USB JP3 jumper set to 5v; It doesn't wake up with remote or mouse. I tried waking it up with mouse when JP3 was set to default 5Vdual also.

Did you read this? http://wiki.xbmc.org/?title=Enable_Wake-On-Device

idlehands Wrote:You get suspend and wake with remote to work? I have an MCE receiver plugged in front and have the USB JP3 jumper set to 5v; It doesn't wake up with remote or mouse. I tried waking it up with mouse when JP3 was set to default 5Vdual also.

BurningSky Wrote:Did you read this? http://wiki.xbmc.org/?title=Enable_Wake-On-Device

I just ordered a MCE rcvr so for the time being I'm just turning it on/off manually and using a BT dongle for a mouse.

But when I get it, I will follow that wiki - thanks.

I have the IONITX-F-E and found that the 5VDual was the correct jumper setting. If you have everything set up properly and the jumper at 5V it'll just bounce back on when you try to suspend it.

Settings: JP3 5v.dual

/proc/acpi/wakeup :
USB0 S4 enabled pci:0000:00:04.0
USB2 S4 enabled pci:0000:00:04.1
US15 S4 enabled pci:0000:00:06.0
US12 S4 disabled pci:0000:00:06.1

bios settings: S3(STR)
repost video on s3 resume(no)

/boot/grub/menu.lst -> added in usbcore.autosuspend=-1

Bios was causing me issues, spent half the morning with the acpi wakeup settings.

Thanks!

I bought the Zotac Ionitix A-U motherboard last week. I installed XBMC Live on on a 8 GB USB drive. I stream all videos from my main PC to it, and only plan to use XBMC on it, so there's no need to install a big HD into right now. Using 2GB of RAM. Very happy with it so far.

Just waiting for my Xbox USB adapter to arrive, so I can setup the Xbox DVD Dongle, and my harmony 880 remote. Just using a keyboard right now.

idlehands Wrote:Settings: JP3 5v.dual

/proc/acpi/wakeup :
USB0 S4 enabled pci:0000:00:04.0
USB2 S4 enabled pci:0000:00:04.1
US15 S4 enabled pci:0000:00:06.0
US12 S4 disabled pci:0000:00:06.1

bios settings: S3(STR)
repost video on s3 resume(no)

/boot/grub/menu.lst -> added in usbcore.autosuspend=-1

Bios was causing me issues, spent half the morning with the acpi wakeup settings.

Thanks!

Hi.

Been trying to stop computer from autoresuming right after suspend. My Xbox ir dongle is in USB2 and if I allow it to suspend, it will just resume right away.

I've triple checked everything from bios and /proc/acpi/wakeup but nothing seems to help.

Have any ideas?

Make sure JP3 is set to 5v.dual

TugboatBill Wrote:Make sure JP3 is set to 5v.dual

It's default setting and I've checked it already. Resuming from suspend works with usb keyboard just fine. That is if I only enable it to have permissions to resume in /proc/acpi/wakeup.

I removed all usb devices from the computer and it still resumes right after going to suspend.

Maybe a log file can help

~/.xbmc/temp/xbmc.log

I have a Zotac Ionitix A-U motherboard, I have everything set up and working that I want pretty much, but have one problem. When I start a video the audio is delayed about 1 second, maybe a little over 1 second. So the video starts then it takes a sec for the audio to start, when it does it is in sync with the video so that is not the problem, its just delayed at starting. Im using audio over hdmi, this is an annoying bug because everything like music and any vids where audio starts right away is always cut off for the first second or so. Anyone else have this problem or know a fix? thanks!