• 1(current)
  • 2
  • 3
  • 4
  • 5
  • 7
High CPU Usage on SVN Build
#1
I updated my system to SVN revision 23370 and the CPU usage has gone to 100% just idling, any clues? The system was running flawless on a build from about a week ago.
Reply
#2
Haven't you been around long enough to know we need way more detail than that?
Reply
#3
I can't get 23370 to build, I think i'm missing libfaad
Reply
#4
Meant to include this: http://pastebin.com/m781c8bf2

I really don't have much more info. I build xbmc about 10-12 days ago from SVN and it was working great. I build today from the latest SVN from the new trunk and it builds fine but runs at 100%+ CPU utilization idling.
Reply
#5
I've also tried removing .xbmc to see if it was a config or cache issue
Reply
#6
The session in that log is 3s in length. Not really enough time for things to settle down at all. Do another, switch to PM3HD first, restart xbmc, let it run for a minute or so, then kill it and up the new log.
Reply
#7
This ones just over 2m: http://pastebin.com/m35b932b4
Reply
#8
TREX6662k5 Wrote:I can't get 23370 to build, I think i'm missing libfaad

Than add it! apt-get install faad-dev or atp-get install libfaad-dev i dont remember exactly which one.

But if you ever have a build failure due to a missing lib [and oh how it happens a LOT] then try to read the readme.linux or readme.ubuntu and it will normally tell you which libs you need.
Main Rig [Scorpius] - Core i7 2600k @ 5Ghz. 16 Gig DDR3 1600. 1x HD 6990 1x HD 4870 Hackintosh [Chiana] - Core i5 @ 3.8Ghz. 12 Gig DDR3 Linux [Moya] - Core2 Duo E8200 - 2 Gigs DDR2 800 WHS [Zhaan] - DualCore [email protected] - 4 Gigs DDR2 800 VMC [Jothee] Core2 Quad @ 2.8Ghz 4 Gigs DDR2 800 VMC [Aeryn] Core2 E8400 @ 3.0Ghz 2 Gigs DDR2 800 2TB Server [Talyn] Core2 Quad Q6600 @ 3.0Ghz - 8 Gigs DDR2 1066 FileServer [Crichton] P4 650 3.4GHz - 2 Gigs DDR
Reply
#9
OK I still cannot resolve this issue. I got so desperate that I formatted the drive and reinstall from scratch. I compiled a fresh build from svn rev 23737 and I am getting 100%+ CPU utilization. The logs show absolutely nothing wrong. I am at an utter loss.

http://pastebin.ca/1622361
Reply
#10
I should mention I have a nvidia geforce fx 5700 running driver version 173.14.16
Reply
#11
NOTICE: GL_VERSION = 2.1.2 NVIDIA 173.14.16

Update your video drivers.

TheUni
Reply
#12
Maybe this has something to do with this .. http://forum.xbmc.org/showthread.php?tid=59498
The normal XBMC log IS NOT a debug log, to enable debug logging you must toggle it on under XBMC Settings - System or in advancedsettings.xml. Use XBMC Debug Log Addon to retrieve it.
Reply
#13
I updated to the newest driver available:


10:49:55 T:3046893440 M:871178240 NOTICE: GL_VENDOR = NVIDIA Corporation
10:49:55 T:3046893440 M:871178240 NOTICE: GL_RENDERER = GeForce FX Go5700/AGP/SSE2
10:49:55 T:3046893440 M:871178240 NOTICE: GL_VERSION = 2.1.2 NVIDIA 173.14.20
Reply
#14
I believe if you create the following entry in advancedsettings, it will create more detail log with freemem, fps and cpu usage and full smb logging:

<loglevel hide="false">3</loglevel>

You can try that and post logs again.
The normal XBMC log IS NOT a debug log, to enable debug logging you must toggle it on under XBMC Settings - System or in advancedsettings.xml. Use XBMC Debug Log Addon to retrieve it.
Reply
#15
I added the entry:

http://pastebin.ca/1622475
Reply
  • 1(current)
  • 2
  • 3
  • 4
  • 5
  • 7

Logout Mark Read Team Forum Stats Members Help
High CPU Usage on SVN Build0