2009-11-10, 01:10
Hello, I plan to use XBMC on my new HTPC but before, I try to configure my Harmony 555 with a USB-UIRT and I have some issues.
First step, choose what remote controller my Harmony will emulate, in order to configure LIRC accordingly. I selected MCE USB and successfully configured Harmony with the logitech software.
Second step, check that everything is correct with LIRC. For that, I typed:
On another console,
But nothing happened when I push the Harmony buttons
So to be sure that everything was OK with the IR receiver, I typed:
As soon as I push a button, pulse/space lines appear...
So what's wrong with my configuration ?
Thanks
First step, choose what remote controller my Harmony will emulate, in order to configure LIRC accordingly. I selected MCE USB and successfully configured Harmony with the logitech software.
Second step, check that everything is correct with LIRC. For that, I typed:
Code:
sudo lircd -n -d /dev/ttyUSB0 -H usb_uirt_raw /usr/share/lirc/remotes/mceusb/lircd.conf.mceusb
lircd-0.8.6[11911]: lircd(usb_uirt_raw) ready, using /var/run/lirc/lircd
lircd-0.8.6[11911]: accepted new client on /var/run/lirc/lircd
lircd-0.8.6[11911]: uirt2_raw: checksum error
lircd-0.8.6[11911]: uirt2_raw: UIRT version 0905 ok
On another console,
Code:
irw
But nothing happened when I push the Harmony buttons
So to be sure that everything was OK with the IR receiver, I typed:
Code:
sudo mode2 -d /dev/ttyUSB0 -H usb_uirt_raw
mode2: uirt2_raw: checksum error
mode2: uirt2_raw: UIRT version 0905 ok
space 2756900
pulse 2700
space 750
pulse 500
space 350
pulse 500
space 350
pulse 500
space 750
pulse 500
As soon as I push a button, pulse/space lines appear...
So what's wrong with my configuration ?
Thanks