My HTPC Hardware Configuration
#1
Hello together,

i want to build a mikro-atx system for streaming hd-videos via xbmc/linux.

dont want to spent too much money.
can you give me a hint, wether this config is ok:

MSI K9A2VM-F V2, 780V (dual PC2-8500U DDR2) (7302-030R) (without spdif)
http://geizhals.at/deutschland/a337179.html

Gainward GeForce G 210, 512MB DDR2, VGA, DVI, HDMI, PCIe 2.0
http://geizhals.at/deutschland/a472175.html

AMD Sempron 140, 2.70GHz, boxed (SDX140HBGQBOX)
http://geizhals.at/deutschland/a446681.html

Case: LC-Power 2039MB
http://geizhals.at/deutschland/a238598.html

Thanks for you help
Reply
#2
should be ok, not the most elegant solution but it should do the job.
Reply
#3
By the time you add in ram and a hdd. Seems like you could spend just a little bit more and get a Zotac Mag or an Acer Revo... Not to mention, those would be smaller Smile

-Erik
Don't be scared to ask questions. Odds are someone else is wondering the same thing.
Closet - Norco 4020 - Supermicro X8SAX - Intel i7-920 - Corsair HX1000 - Corsair XMS3 12GB - 10x1.5tb Raid 5 - 10x2tb Raid 5 - Openfiler VM inside Workstation Win7 x64
Living room - Silverstone ML02B-MXR - Gigabyte GA-E7AUM-DS2H - E8400 - OCZ Platinum Edition 4GB - Denon 3310CI
Bedroom - Antec Mini Skeleton - Zotac IONITX-B-E @ 1.92ghz - AVS Gear HA-IR01SV - A-DATA G series 4GB - Denon 2808CI
Reply
#4
thanks for you replys.

i have the possibility to put the case in the tv-rack so you can not see it behind the window-doors of the rack.

so i dont have to spend money on mini-ITX (revo, zotac) and have more cpu power (sempron) and gpu-power G210 and i have the possibility to put in a stadnard dvbs2 card for vdr in the future.

so i want to spend the money in performance not in design - perhaps you have a better suggestion for motherboard and/or cpu / gpu combination.

thanks
Reply
#5
Barebone,

I went the same route as you plan, standard-sized case, and I am completely happy with my setup. I used a black neutral finished case (Coolermaster Sileo 500, I did a little modding on it to change the kind of ugly LED lights), it in fact goes very well with my Onkyo TX SR6060 receiver.

If I can give you one piece of advice: invest in silent components, it pays-off. I used Noctua's NH-U12P CPU heatsink. I actually am not even using its fan, just the heatsink, on a C2D E4400. I have only one fan in the system, a rear-case fan, a Noctua NF-12S. At night, getting closer to the TV rack, I can hear the low buzz of my LCD TV, but can't hear the PC at all.

I have a full-fledged PC to which I can add whatever standard hardware needed (TV Tunner cards, etc), silent and nice lookig (for my taste). Cool
Reply

Logout Mark Read Team Forum Stats Members Help
My HTPC Hardware Configuration0