[Crazy_Land1]

Hi all, i have done some searching but have not found the answer im looking for so here is my problem with the suspend and resume...

I have 3 XBMC boxes in my house and one is the problem i am having trouble with, the problem started a few weeks ago that was another problem that lead to this one.
A few weeks ago i noticed that the movies i have on my server, some that are mp3 2 channel audio and others that are 5.1 channel audio where playing fine other then the 5.1's where coming out as 2 channel only, so i did some looking around in the settings and all looked good in xbmc then i looked at alsa and found every thing was good there too but still only getting 2 channel on all videos.
So i decided to reinstall with the newer version of xbmc and after setting up the audio thru alsa and xbmc i found my problems was that i had the Dolby Digital (AC3) unchecked and that was my problem from the start with the sound.

That is now fixed but since i did a reinstall now i have the suspend/resume problem, i can get it to do it once right after a reboot or a start up but then after that it just reboots its self.

I have looked thru all the posts about suspend/resume problems and compared them to mine and did some changes to some files but it still will not suspend and resume.

So i fired up all 3 XBMC's and compared them to each other and found some thing im not sure about.
I did a cat /proc/acpi/wakeup and here is what i get back

Bedroom and Rec-room XBMC say that same thing

xbmc@XBMCLive:~$ cat /proc/acpi/wakeup
Device S-state Status Sysfs node
HUB0 S5 disabled pci:0000:00:0a.0
XVR0 S5 disabled pci:0000:00:0b.0
XVR1 S5 disabled pci:0000:00:0c.0
XVR2 S5 disabled pci:0000:00:0d.0
PS2M S4 disabled pnp:00:08
USB0 S3 enabled pci:0000:00:04.0
USB2 S3 disabled pci:0000:00:04.1
AZAD S5 disabled pci:0000:00:09.0
MMAC S5 disabled pci:0000:00:0f.0
xbmc@XBMCLive:~$

Living-room says this

xbmc@XBMCLive:~$ cat /proc/acpi/wakeup
Device S-state Status Sysfs node
PS2K S4 disabled pnp:00:09
SMB0 S4 disabled pci:0000:00:03.2
USB0 S4 enabled pci:0000:00:04.0
USB2 S4 enabled pci:0000:00:04.1
US15 S4 disabled pci:0000:00:06.0
US12 S4 disabled pci:0000:00:06.1
NMAC S5 disabled pci:0000:00:0a.0
PBB0 S4 disabled pci:0000:00:09.0
HDAC S4 disabled pci:0000:00:08.0
XVR0 S4 disabled pci:0000:00:0c.0
XVR1 S4 disabled
P0P5 S4 disabled
P0P6 S4 disabled pci:0000:00:15.0
P0P7 S4 disabled pci:0000:00:16.0
P0P8 S4 disabled pci:0000:00:17.0
P0P9 S4 disabled pci:0000:00:18.0
PWRB S4 *enabled
xbmc@XBMCLive:~$

As you can see most of the list has S4 on it including the USB0 and 2 but the Bedroom and Rec-room XBMC has S3 on the USB0 and 2.

So my question is has any one come across this and if so how do i fix that

[idlehands]

Did you try toggling them on and off so they match?

[Crazy_Land1]

if you mean to disable them then re-enable them then yes, i know my remote is on USB0 but don't understand as to why they show as S4 and not S3 like they do on the other systems

[ZooMigo]

If you are using the 9.11 repack iso, this is a known, unsolved problem. I fixed it by going back to the 9.11 beta iso. Patiently waiting the v10 iso that will hopefully fix these problems as well as the smb errors.