2010-08-30, 10:20
Hello Everyone. I've been having a problem with xbmc video lately. When I play video, I get a black line that starts near the top and falls off the bottom of the screen within 10 seconds, and immediately starts again at the top. The thing is it only happens on one of my 2 connected monitors in clone mode (the one connected through HDMI) and it only started recently. I am running svn33300 on ubuntu 10.04, and I have a ATI raedon 4750 graphics card. the problem only started recently(definitely within the past week and more likely within the past 3 days). I tried turning off desktop effects as many have suggested on the forums, and tried every combination of settings I could find in the menus but it did not help, and I'm out of ideas. anybody else have one?
Thanks in advance
(my xorg.conf file if that will help)
Section "Monitor"
Identifier "0-DFP2"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1680x1050"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP_EXTTMDS"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1680x1050"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-CRT1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "true"
EndSection
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
SubSection "Display"
Virtual 2960 1050
EndSubSection
EndSection
Section "Screen"
Identifier "amdcccle-Screen[5]-0"
Device "amdcccle-Device[5]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 2960 1050
EndSubSection
EndSection
Section "Screen"
Identifier "amdcccle-Screen[5]-1"
Device "amdcccle-Device[5]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 2960 1050
EndSubSection
EndSection
Section "Module"
Load "glx"
EndSection
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[5]-0" 0 0
EndSection
Section "Device"
Identifier "Default Device"
Driver "fglrx"
EndSection
Section "Device"
Identifier "amdcccle-Device[5]-0"
Option "Monitor-CRT1" "0-CRT1"
Option "Monitor-DFP_EXTTMDS" "0-DFP_EXTTMDS"
BusID "PCI:5:0:0"
Driver "fglrx"
EndSection
Section "Device"
Identifier "amdcccle-Device[5]-1"
Driver "fglrx"
Option "Monitor-CRT1" "0-CRT1"
BusID "PCI:5:0:0"
Screen 1
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Section "Extensions"
Option "Composite" "disable"
EndSection
Thanks in advance
(my xorg.conf file if that will help)
Section "Monitor"
Identifier "0-DFP2"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1680x1050"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP_EXTTMDS"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1680x1050"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-CRT1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "true"
EndSection
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
SubSection "Display"
Virtual 2960 1050
EndSubSection
EndSection
Section "Screen"
Identifier "amdcccle-Screen[5]-0"
Device "amdcccle-Device[5]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 2960 1050
EndSubSection
EndSection
Section "Screen"
Identifier "amdcccle-Screen[5]-1"
Device "amdcccle-Device[5]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 2960 1050
EndSubSection
EndSection
Section "Module"
Load "glx"
EndSection
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[5]-0" 0 0
EndSection
Section "Device"
Identifier "Default Device"
Driver "fglrx"
EndSection
Section "Device"
Identifier "amdcccle-Device[5]-0"
Option "Monitor-CRT1" "0-CRT1"
Option "Monitor-DFP_EXTTMDS" "0-DFP_EXTTMDS"
BusID "PCI:5:0:0"
Driver "fglrx"
EndSection
Section "Device"
Identifier "amdcccle-Device[5]-1"
Driver "fglrx"
Option "Monitor-CRT1" "0-CRT1"
BusID "PCI:5:0:0"
Screen 1
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Section "Extensions"
Option "Composite" "disable"
EndSection