2011-01-11, 05:45
Works Great on XBMCFreak 10.00 V1 Dahrma final (Name is wrong but you get the point which one)..
I did have to do the following for dependencies
sudo service xbmc-live stop
sudo add-apt-repository ppa:lucid-bleed/ppa
sudo apt-get update
sudo apt-get install libmodplug1 libmodplug-dev libmodplug0c2 libssh-4 libssl-dev
Then copied binary over existing file as mentioned above! (of course making a backup first)
sudo reboot
Voila it was there and ready to be configured!
THANKS!!!!!!!! This is AWESOME!
PS throught I would add my GUI settings as an FYI.
Both on the Same Sound Card
Output 1 - Optical to Stereo
Output 2 - Stereo Output to House Audio System
In the past I would get static on the Stereo Output when playing a multichannel audio, That is a thing of the past!!!!!
<audiooutput>
<ac3passthrough>true</ac3passthrough>
<audiodevice>alsa:plug:iec958</audiodevice>
<channellayout>7</channellayout>
<customdevice></customdevice>
<custompassthrough></custompassthrough>
<dontnormalizelevels>true</dontnormalizelevels>
<dtspassthrough>true</dtspassthrough>
<mode>1</mode>
<passthroughaac>false</passthroughaac>
<passthroughdevice>alsa:iec958</passthroughdevice>
<passthroughmp1>false</passthroughmp1>
<passthroughmp2>false</passthroughmp2>
<passthroughmp3>false</passthroughmp3>
</audiooutput>
<audiooutput2>
<ac3passthrough>true</ac3passthrough>
<audiodevice>custom</audiodevice>
<channellayout>0</channellayout>
<customdevice>plughw:0,0</customdevice>
<custompassthrough></custompassthrough>
<dontnormalizelevels>true</dontnormalizelevels>
<dtspassthrough>true</dtspassthrough>
<mode>0</mode>
<passthroughaac>false</passthroughaac>
<passthroughdevice>iec958</passthroughdevice>
<passthroughmp1>false</passthroughmp1>
<passthroughmp2>false</passthroughmp2>
<passthroughmp3>false</passthroughmp3>
</audiooutput2>
I did have to do the following for dependencies
sudo service xbmc-live stop
sudo add-apt-repository ppa:lucid-bleed/ppa
sudo apt-get update
sudo apt-get install libmodplug1 libmodplug-dev libmodplug0c2 libssh-4 libssl-dev
Then copied binary over existing file as mentioned above! (of course making a backup first)
sudo reboot
Voila it was there and ready to be configured!
THANKS!!!!!!!! This is AWESOME!
PS throught I would add my GUI settings as an FYI.
Both on the Same Sound Card
Output 1 - Optical to Stereo
Output 2 - Stereo Output to House Audio System
In the past I would get static on the Stereo Output when playing a multichannel audio, That is a thing of the past!!!!!
<audiooutput>
<ac3passthrough>true</ac3passthrough>
<audiodevice>alsa:plug:iec958</audiodevice>
<channellayout>7</channellayout>
<customdevice></customdevice>
<custompassthrough></custompassthrough>
<dontnormalizelevels>true</dontnormalizelevels>
<dtspassthrough>true</dtspassthrough>
<mode>1</mode>
<passthroughaac>false</passthroughaac>
<passthroughdevice>alsa:iec958</passthroughdevice>
<passthroughmp1>false</passthroughmp1>
<passthroughmp2>false</passthroughmp2>
<passthroughmp3>false</passthroughmp3>
</audiooutput>
<audiooutput2>
<ac3passthrough>true</ac3passthrough>
<audiodevice>custom</audiodevice>
<channellayout>0</channellayout>
<customdevice>plughw:0,0</customdevice>
<custompassthrough></custompassthrough>
<dontnormalizelevels>true</dontnormalizelevels>
<dtspassthrough>true</dtspassthrough>
<mode>0</mode>
<passthroughaac>false</passthroughaac>
<passthroughdevice>iec958</passthroughdevice>
<passthroughmp1>false</passthroughmp1>
<passthroughmp2>false</passthroughmp2>
<passthroughmp3>false</passthroughmp3>
</audiooutput2>