2010-12-30, 09:27
alanwww1 Wrote:Man, why not read my guide just once and do it that way. Your xorg.conf is not ok. You have to specify the output being used on the motherboard. Just like i did in the guide (first post). Please do it that way. Take a moment and check it carefully.Hi Alan.
I am pretty familiar with xorg.conf to understand what is required and what isn't. but here is xorg.conf I am using from your guide:
Code:
Section "Monitor"
Identifier "HDMI2"
HorizSync 14.0 - 70.0
VertRefresh 48.0 - 62.0
Modeline "1920x1080@24p" 74.16 1920 2558 2602 2750 1080 1084 1089 1125 +HSync +VSync
Modeline "1920x1080@25p" 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +HSync +VSync
Modeline "1920x1080@60p" 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +HSync +VSync
Modeline "1920x1080@50p" 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +HSync +VSync
Modeline "1920x1080@60i" 74.18 1920 2008 2052 2200 1080 1084 1094 1124 +HSync +VSync Interlace
Modeline "1920x1080@50i" 74.25 1920 2448 2492 2640 1080 1084 1094 1124 +HSync +VSync Interlace
ModeLine "[email protected]" 74.175 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
BusID "PCI:0:2:0"
Option "FallbackDebug" "boolean"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "HDMI2"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080@60p" "1920x1080@24p" "1920x1080@25p" "1920x1080@50i" "1920x1080@50p" "1920x1080@60i" "[email protected]"
EndSubSection
EndSection
I don't see any refresh rates from Settings->System->Video, except 0. and don't see refresh change:
Code:
09:19:42 T:140027132634896 M:3479425024 NOTICE: running thread: CDVDPlayerAudio::Process()
09:19:42 T:140027132634896 M:3479425024 NOTICE: Creating audio device with codec id: 86017, channels: 1, sample rate: 48000, no pass-through
09:19:42 T:140027234633488 M:3479425024 NOTICE: fps: 25.000000, pwidth: 640, pheight: 480, dwidth: 640, dheight: 480
09:19:42 T:140027234633488 M:3479650304 WARNING: CRenderManager::Configure - timeout waiting for previous frame
09:19:42 T:140027234633488 M:3479650304 NOTICE: Display resolution ADJUST : 1920x1080 (12) (weight: 1.000)
09:19:42 T:140027863889856 M:3479113728 NOTICE: Using GL_TEXTURE_2D
could you post xbmc.log with notice that refresh was changes? and xbmc build configuration after "./configure".
just to find the root on my system.