2011-02-03, 06:34
:bashing head into computer:
bostoneric Wrote:I'd really like to avoid starting from scratch again and again.
i've already reloaded Dharma Live 2 times to make sure I'm doing these steps on a clean install...
bostoneric Wrote:ok i'll check out that thread you linked.
sorry didnt see it since you added after I replied.
bmcclure937 Wrote:Just curious, has anyone contacted the LIRC folks to let them know that this device should be supported in future builds so these mods are not necessary?!
bmcclure937 Wrote:So it should work great with this XBMCFreak build. I am running that due to the latest nVidia drivers and Linux kernel.
I was worried about it running on 10.10 Maverick at first, but it has been doing fine.
/* Fintek eHome Infrared Transceiver (HP MCE Remote) */
{ USB_DEVICE(VENDOR_FINTEK, 0x5168) },
sudo apt-get install lirc-modules-source
cd /usr/src/lirc-0.8.6/lirc_mceusb
cp lirc_mceusb.c lirc_mceusb.c.old
sudo /etc/init.d/lirc stop
sudo rrmod lirc_mceusb
sudo rmmod lirc_dev
sudo dkms remove -m lirc -v 0.8.6 --all
sudo dkms add -m lirc -v 0.8.6
sudo dkms -m lirc -v 0.8.6 build
sudo dkms -m lirc -v 0.8.6 install
sudo /etc/init.d/lirc start