5.1 mapping issues for AAC, but not for AC3 or DTS - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111) +---- Forum: Mac OS X (https://forum.kodi.tv/forumdisplay.php?fid=56) +---- Thread: 5.1 mapping issues for AAC, but not for AC3 or DTS (/showthread.php?tid=201003) |
5.1 mapping issues for AAC, but not for AC3 or DTS - wzarnowiecki - 2014-07-30 Hi all, sorry if this was posted earlier, but i couldn't find it if it was. Since the last frodo 13.1, i have a mapping issue with XBMC for AAC files only. If i am playing AC3 or DTS, there's no problem and the mapping is fine, i only have this issue with AAC. I am guessing it's a configuration issue with XBMC, as if i play the file on VLC, the mapping is fine. I tried pretty much everything i have seen on various threads, but with no success, and am stuck with using VLC if i really want the 5.1, or switch the movie into stereo in XBMC. I am on a mac mini from 2011, running maverick, with an HDMI connection to a Samsung AV receiver. Does anyone have a solution ? thanks in advance. RE: 5.1 mapping issues for AAC, but not for AC3 or DTS - Memphiz - 2014-07-31 Are you using passthrough in XBMC or did you configure speaker layout to 5.1 instead (which would use muiltichannel PCM then)? RE: 5.1 mapping issues for AAC, but not for AC3 or DTS - wzarnowiecki - 2014-07-31 Thanks for the reply. i tried both if i recall correctly, but i will try again this evening and confirm it to you. RE: 5.1 mapping issues for AAC, but not for AC3 or DTS - Memphiz - 2014-07-31 debug log (wiki) for both cases... RE: 5.1 mapping issues for AAC, but not for AC3 or DTS - wzarnowiecki - 2014-07-31 so, i tried with and without passthrough, same issue. mapping is wrong for AAC, but still ok for DTS and AC3. I tried to get the debug logs in both cases, but i never got the email. I know i should be able to give the log ID number, but i couldn't see it anywhere. I can however send you the xbmc.log file if you want to check, but i was told not to post such things on the forum. RE: 5.1 mapping issues for AAC, but not for AC3 or DTS - Martijn - 2014-07-31 post it on xbmclogs.com or pastebin.com and give the link |