Posts: 10
Joined: Jan 2012
Reputation:
0
damos
Junior Member
Posts: 10
2012-02-02, 01:03
Now, it works perfectly!!!
Sergbach, thank you very much for your explanations!!
Posts: 5
Joined: Jan 2012
Reputation:
0
You are welcome, damos!
I am glad that I could help you.
Have you done something extra or just followed my steps?
Posts: 10
Joined: Jan 2012
Reputation:
0
damos
Junior Member
Posts: 10
No, no... I have just followed your steps and all OK.
Posts: 1
Joined: Feb 2012
Reputation:
0
I just recently bought zotac ad10 and Im trying to configure the remote. Reading the previous posts, I'm a bit confused.
Can someone offer a step by step instructions?
.reg link is dead as well.
Also how do you configure the windows button on the remote, so that I can open xbmc?
Posts: 4
Joined: Aug 2011
Reputation:
0
2012-02-24, 01:44
(This post was last modified: 2012-02-24, 03:02 by bberry.)
I, too, am a new owner of an AD10 and I'm new at configuring this stuff.
I am unable to get any RC-response from the color keys / info. I have modified CreateTestConfig.reg, substituting 745a17a0-74d3-11d0-b6fe-00a0c90f57da for 745a17a0-74d3-11d0-b6fe-00a0c90f57df, applied it and rebooted. I don't understand why ShowKey20 still can't get any signal from those special keys.
Please help..
Posts: 3
Joined: Feb 2012
Reputation:
0
I'm in the process of setting up XBMC 10 on my AD10 (Windows 7 Pro x64); does anyone have easy setup files I can just run that will make the remote work better?
I.e., how some of you have the colour keys doing options (I know, that can be a person preference, but Id love to start with someone else's preferences then modify as needed).
Posts: 8
Joined: Nov 2009
Reputation:
0
I am running XBMCbuntu on my ZBox AD10 and several button of the Zotac Remote work, but not all. Especial not being able to use the "info" button is extremely inconvenient. I have been searching around but most solution seems to be for windows based system or mention the MCERemote addon, which I cannot find in the repository.
Considering the popularity of the ZBOX, it seems to me many people should be facing the same problem. Anyone got a solution?
Posts: 5
Joined: Apr 2012
Reputation:
0
2012-04-30, 16:12
(This post was last modified: 2012-04-30, 16:13 by usagent27.)
if someone could post a easy step by step guide for this remote/box combo i would apreciate it. i just started using XBMC so please take it easy on me. I have the remote kinda working. All i want to do now is get the info button to work and remap one button for context menu. i managed to get the green button remapped to launch XBMC instead of WMC.
Thank you in advance
running win 7 ultimate 64 bit/ 4 gb ram/ 120 gb ssd. Zotac Nano AD10
Posts: 7,256
Joined: Nov 2008
Reputation:
121
I don't have an AD10 so this isn't something I can test.
eHome remotes can generally be configured by modifying a registry value. The MCERemote and other similar tools work by modifying this registry value. It appears that the AD10 uses a different registry value from other eHome remotes so MCERemote can't configure it. To configure your AD10 you'll need to get a suitable registry file from someone. I can't make you one because I don't have an AD10 to test with, however the post I linked to has a likely looking registry file. You can copy and paste into Notepad then save as, for example, AD10.reg. Doubleclicking the file should then make the required changes.
Posts: 5
Joined: Apr 2012
Reputation:
0
ok thank you i will try this and post back if it worked