2011-08-13, 19:15
I have an apple tv1 running crystalbuntu distributed by Sam Nazarko. I am trying to 1080p24 working on XBMC. I ran X in verbose mode and ensured that my display was able to support 1080p24 and it does. I even got the information required to generate the modeline for xorg.conf.
My xorg.conf is as follows
When I check the Xorg log file I have the following warning
For some reason nvidia is not able to get the 1920x1080 @ 24Hz mode by default. Even if I add the modeline it doesnt recognize it. Any help to get this working would be appreciated.
My xorg.conf is as follows
Code:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "SNY"
ModelName "Sony TV"
HorizSync 15.0 - 70.0
VertRefresh 58.0 - 62.0
Option "DPMS"
Modeline "1920x1080_24" 74.16 1920 2558 2602 2750 1080 1084 1089 1125 +HSync +VSync
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
Option "RegistryDwords" "RMDisableRenderToSysmem=1"
Option "DynamicTwinView" "false"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080" "1920x1080_60" "1920x1080_60_0" "1920x1080_24"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
When I check the Xorg log file I have the following warning
Code:
(WW) NVIDIA(0): No valid modes for "1920x1080_24"; removing.
For some reason nvidia is not able to get the 1920x1080 @ 24Hz mode by default. Even if I add the modeline it doesnt recognize it. Any help to get this working would be appreciated.