A6-PACK ☆ ISK 300-90 picoPSU HTPC A6-3500 Very Silent!

(2012-05-17 08:17)MrKay Wrote:  Yeah am just gonna do it again beer i did install windows in AHCI. beer what drivers do i need to get it to work any idea. Should i just install all in 1 and ccc driver only

So let me get this straight are you just using HDMI for audio? if so yes.....

No am using the optical out for 5.1 sound. The optical goes from the computer to optical in the receiver

beer am nearly finishing my windows install first gonna install AMD all in 1 driver ver:8.86RC2 then gonna install Catalyst Software Suite 153.5 MB 12.4 or should i not install Catalyst Software Suite 153.5 MB 12.4

It would be a P.I.T.A to have to reload your system.
Have you checked the Device Manager for any potential problems?
May be a long shot, did you turn of the Media Features?



*edit - I see I'm to late to stop you .......

Nope did not turn off media features. To be honest don't know what that is. Just installed windows 7 64bit the 6 time from a secure erase. Installed AMD all in 1 driver ver:8.86RC2 and Catalyst Software Suite 153.5 MB 12.4 Now when i go to hardware and sound then inside sound in playback tab i see Digital Audio (S/PDIF) but when i right click and test equalizer moves but no sound

Do you think i should buy a sound card if so anyone know what sound card i can fit in an antec isk 300 case

In the past set ups I've done, I turn the Media Features off so the remote doesn't send a signal and start Windows Media Center. I don't know for certain if it would affect S/PDIF. You made so many changes to the system it's difficult to know if you had a driver conflict or corruption unless you checked for them.

I feel bad for you that you are struggling and can only imagine the headache you have.
Maybe the best thing to do is walk away for a while and take time for yourself.
Best of luck to you, I'm sure you will work it out.

You can find the Media Features here for Win7 -
Control Panel/Programs and Features/Turn Windows Features On or Off.

(2012-05-17 09:34)Driver 944 Wrote:  In the past set ups I've done, I turn the Media Features off so the remote doesn't send a signal and start Windows Media Center. I don't know for certain if it would affect S/PDIF. You made so many changes to the system it's difficult to know if you had a driver conflict or corruption unless you checked for them.

I feel bad for you that you are struggling and can only imagine the headache you have.
Maybe the best thing to do is walk away for a while and take time for yourself.
Best of luck to you, I'm sure you will work it out.

You can find the Media Features here for Win7 -
Control Panel/Programs and Features/Turn Windows Features On or Off.

Thanks

(2012-05-16 12:22)s1l3nc0r Wrote:  @Beer: Do you know if the guy you ordered the picopsu from, also delivers in The Netherlands ?

Mine is still working fine with Antec PSU in combination with the 120 W Toshiba Laptop adapter, but just to be on the safe side, I might like to order a new one...

I think you should get faster shipping, better prices, no custom from this seller that is based in The Netherlands

http://www.logicsupply.nl/power-supplies...su-160-xt/

(2012-05-17 08:58)MrKay Wrote:  Nope did not turn off media features. To be honest don't know what that is. Just installed windows 7 64bit the 6 time from a secure erase. Installed AMD all in 1 driver ver:8.86RC2 and Catalyst Software Suite 153.5 MB 12.4 Now when i go to hardware and sound then inside sound in playback tab i see Digital Audio (S/PDIF) but when i right click and test equalizer moves but no sound

One thing I haven't mention- since you are using Optical output from MOBO, you need to disable HDMI audio output in Windows 7 Control Panel/Hardware and Sound/Sound/Playback. You can simply Right/Click AMD HDMI output and scroll down to Disable to disable it. Then, you can select the correct "Realtek Digital Output (Optical)"........