2012-06-30, 09:48
Hi,
I've got an Xbox 360 connected to a Sony 32EX403 via HDMI. The TV passes through the dolby digital audio to a sherwood amp.
I'm trying to do the same thing with the revo but can't work out what settings I need to use, the best success I've had has been to hear a hiss over the speakers when playing a film. I've setup the audio like this:
Edit I can get it to play stereo films out over HDMI but when I try AC3/DTS soundtracks it starts hissing
Audio Output : HDMI
Speaker Configuration : 5.1
Boost volume level on downmix : No
Dolby Digitla (AC3) capable receiver : Yes
DTS capable receiver : Yes
Audio output device : hdmi(ALSA)
Passthrough output device : hdmi(ALSA)
aplay -l
gcthompson@xbmclive:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
aplay -L
gcthompson@xbmclive:~$ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=NVidia
HDA NVidia, ALC662 rev1 Analog
Default Audio Device
front:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
Front speakers
surround40:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
dmix:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
Direct sample mixing device
dmix:CARD=NVidia,DEV=1
HDA NVidia, ALC662 rev1 Digital
Direct sample mixing device
dmix:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct sample mixing device
dsnoop:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
Direct sample snooping device
dsnoop:CARD=NVidia,DEV=1
HDA NVidia, ALC662 rev1 Digital
Direct sample snooping device
dsnoop:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct sample snooping device
hw:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
Direct hardware device without any conversions
hw:CARD=NVidia,DEV=1
HDA NVidia, ALC662 rev1 Digital
Direct hardware device without any conversions
hw:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct hardware device without any conversions
plughw:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
Hardware device with all software conversions
plughw:CARD=NVidia,DEV=1
HDA NVidia, ALC662 rev1 Digital
Hardware device with all software conversions
plughw:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Hardware device with all software conversions
gcthompson@xbmclive:~$
Running this
speaker-test -D plug:hdmi -c6
just makes the input lights flicker on the sherwood amp.
It'd be great to get this working, I want to get rid of the flakey SPDIF switching box... Thanks for the help.
I've got an Xbox 360 connected to a Sony 32EX403 via HDMI. The TV passes through the dolby digital audio to a sherwood amp.
I'm trying to do the same thing with the revo but can't work out what settings I need to use, the best success I've had has been to hear a hiss over the speakers when playing a film. I've setup the audio like this:
Edit I can get it to play stereo films out over HDMI but when I try AC3/DTS soundtracks it starts hissing
Audio Output : HDMI
Speaker Configuration : 5.1
Boost volume level on downmix : No
Dolby Digitla (AC3) capable receiver : Yes
DTS capable receiver : Yes
Audio output device : hdmi(ALSA)
Passthrough output device : hdmi(ALSA)
aplay -l
gcthompson@xbmclive:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
aplay -L
gcthompson@xbmclive:~$ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=NVidia
HDA NVidia, ALC662 rev1 Analog
Default Audio Device
front:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
Front speakers
surround40:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
dmix:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
Direct sample mixing device
dmix:CARD=NVidia,DEV=1
HDA NVidia, ALC662 rev1 Digital
Direct sample mixing device
dmix:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct sample mixing device
dsnoop:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
Direct sample snooping device
dsnoop:CARD=NVidia,DEV=1
HDA NVidia, ALC662 rev1 Digital
Direct sample snooping device
dsnoop:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct sample snooping device
hw:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
Direct hardware device without any conversions
hw:CARD=NVidia,DEV=1
HDA NVidia, ALC662 rev1 Digital
Direct hardware device without any conversions
hw:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct hardware device without any conversions
plughw:CARD=NVidia,DEV=0
HDA NVidia, ALC662 rev1 Analog
Hardware device with all software conversions
plughw:CARD=NVidia,DEV=1
HDA NVidia, ALC662 rev1 Digital
Hardware device with all software conversions
plughw:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Hardware device with all software conversions
gcthompson@xbmclive:~$
Running this
speaker-test -D plug:hdmi -c6
just makes the input lights flicker on the sherwood amp.
It'd be great to get this working, I want to get rid of the flakey SPDIF switching box... Thanks for the help.