2012-09-16, 11:04
I recently found that Aeon Nox 3.5 had mouse support, and as I had wanted to use this for months, quickly switched to it and spent almost an entire day configuring it. After shutting down, I noticed the next day that it was taking around 30 seconds to actually load into the XBMC Home Screen, and would simply just show the loading symbol in the center of a black screen for a while.
I went through and cleaned up some errors in the logs, but it didn't correct the problem at all. When I enabled debug mode to get a proper log file, it only took 3-4 seconds to load in (tested it numerous times). After turning Debug mode back off, the issue of taking 30 seconds or so to load came back. Here are the log files from the most recent session (debug off).
If anyone can help me resolve this issue, it would be extremely appreciated. It is worth noting that I can just hit Enter to go ahead and bypass the loading and get to the Home Screen, but not something you want to do on a regular basis.
Had to use Pastie as the log file was too long to post here.
http://pastie.org/4730814
I went through and cleaned up some errors in the logs, but it didn't correct the problem at all. When I enabled debug mode to get a proper log file, it only took 3-4 seconds to load in (tested it numerous times). After turning Debug mode back off, the issue of taking 30 seconds or so to load came back. Here are the log files from the most recent session (debug off).
If anyone can help me resolve this issue, it would be extremely appreciated. It is worth noting that I can just hit Enter to go ahead and bypass the loading and get to the Home Screen, but not something you want to do on a regular basis.
Had to use Pastie as the log file was too long to post here.
http://pastie.org/4730814