average_male this mode looks really cool. Something like flirc and cir in one device.
Could you please open a thread by its own so that it gets a dedicated thread?
There are some alternatives of cheepp teensy boards like this one http://www.ebay.com/itm/Leonardo-Pro-Mic...25871572b3 they are based on ATmega32U4 same as teensy.
Would it be possible to use those for the same solution?
Would it also work in Linux?
What ir receiver are you using?
Also some more detailed instructions would be very nice.
TNX in advance
Intel NUC OEM+ [Simerec / IR-RC6 internal mod] + Light Dims!
Joined: May 2009
2014-01-05 09:27 Post: #76
Joined: Dec 2013
2014-02-17 22:46 Post: #77
(2014-01-05 09:27)illiac4 Wrote: average_male this mode looks really cool. Something like flirc and cir in one device.
Sorry for the very late reply.
> Would it be possible to use those for the same solution?
Yes, this would be a great cheap solution but two things are a bummer about it, 1) doesn't ship to US 2) I would need to change my firmware and programming method for the device. I actually looked at that device but the seller who ships to US offers the device at about $10 USD and I thought it wouldn't be worth the trouble to alter my setup to use it.
>Would it also work in Linux?
Yes, as the Teensy is working just like a generic USB keyboard and Linux would just enumerate it as a USB Keyboard
>What ir receiver are you using?
TSOP2438 - Generic 38 Khz receiver
>Also some more detailed instructions would be very nice.
Most of the instructions would be just performing the following:
- flash the Teensy with the firmware (not public at this time)
- wire it up as noted in the annotated pictures (schematic would be nice, I know)
To answer your other question about D- and D+, those are the USB data lines used to send keyboard strokes from the Teensy to the NUC.
I'd like to start a new thread but I think it's just a rehash of this thread plus the previously noted advantages. Also, the new NUCs have IR receivers built in.
I am currently working on implementing this Teensy solution for my OUYA. Should have something done shortly.
Joined: Feb 2014
2014-02-28 00:13 Post: #78
Does someone still have a spare Case? I messed up mine, drilled the holes in the wrong height.
If someone has a spare case, please contact me via PM
(This post was last modified: 2014-02-28 00:13 by Bl4ckH4wk.)