2014-02-17, 21:29
Hello All,
Following my setup:
Mac Mini 2010, OS 10.7.5 - xbmc 12.3
Arduino Uno with 50 WS2801 LEDs
raspberry (raspbian) -> for daemon ONLY
boblightd is running on raspberry and xbmc connects to boblightd succesfull.
Here is my boblight.conf: http://pastebin.com/L0yJ7wcC
I made the boblightd by following a german guide:
Unfortunately nothing happens with the LEDs on xbmc.
And I really have no idea why.
I checked if the serial port and IP is correct and both definitely is.
If I do the boblight-constant command, raspberry tells me that "Connection to boblightd opened"
Does anyone have an idea what I did wrong?
Thank you
EDIT: Just want to add some more Information.
If I run the standalone adalight/processing tool, the lights work properly.
I used the guide above because it made sense to me.
If anyone has another guide, which describes how to setup a boblight daemon, I would be happy to try that!
...I'm not sure, if the dispmanx option make sense, because I read this in combination with raspbmc only.
Following my setup:
Mac Mini 2010, OS 10.7.5 - xbmc 12.3
Arduino Uno with 50 WS2801 LEDs
raspberry (raspbian) -> for daemon ONLY
boblightd is running on raspberry and xbmc connects to boblightd succesfull.
Here is my boblight.conf: http://pastebin.com/L0yJ7wcC
I made the boblightd by following a german guide:
Quote:sudo apt-get update
sudo apt-get install make gcc g++ subversion
Quote:svn checkout http://boblight.googlecode.com/svn/trunk/ /home/pi/boblight_source
Quote:cd /home/pi/boblight_source/
./configure --without-portaudio --without-x11 --without-libusb
Quote:make; sudo make install
Quote:cd ~
wget https://github.com/brooc/boblight-rpi/ra...t-dispmanx
chmod 755 boblight-dispmanx
Quote:sudo nano /etc/rc.local
Quote:/usr/local/bin/boblightd -f &
/home/pi/boblight-dispmanx -b on -o interpolation=1 -o speed=90 -o threshold=35 -o autospeed=0 -o saturation=1 -o value=1 -p 100 -i 0.1 -f /dev/null &
Unfortunately nothing happens with the LEDs on xbmc.
And I really have no idea why.
I checked if the serial port and IP is correct and both definitely is.
If I do the boblight-constant command, raspberry tells me that "Connection to boblightd opened"
Does anyone have an idea what I did wrong?
Thank you
EDIT: Just want to add some more Information.
If I run the standalone adalight/processing tool, the lights work properly.
I used the guide above because it made sense to me.
If anyone has another guide, which describes how to setup a boblight daemon, I would be happy to try that!
...I'm not sure, if the dispmanx option make sense, because I read this in combination with raspbmc only.