Posts: 7
Joined: Mar 2014
Reputation:
0
2014-06-09, 14:00
(This post was last modified: 2014-06-09, 14:01 by fuqhard.)
I loaded the image on my MyGica A11. I watched a couple of movies using it, seems to be working great so far. Thanks dhead.
Posts: 696
Joined: May 2010
Reputation:
3
@Nostrodamu
Upload a boot log of one of the working Linux builds and I'll look into it.
The easiest way to do it is:
* Connect a usb drive to your device and power it on.
* Ssh to your device with Putty (user: root, pass: letmein).
* Enter the command "df" that will show you what are the paths that storage partitions (filesystems) are mounting on, and find the path of the usb drive filesystem (usually the filesystem path of partition of the first usb drive is /dev/sda1, when "a" is the drive identifier and "1" is the partition number).
* Go to the directory where the partition is mount on with the command "cd", for example if the path is "/mnt/usb1" then the command is "cd /mnt/usb1".
* Now run the command "ls" to show you the files on the usb drive to confirm you're in the right place.
* Enter the command "dmesg > boot.log" that will create a file boot.log with the boot log.
* Run the command "sync" to make sure the changes are written to the usb drive (and not cached in the ram).
* Powered off you device.
* Disconnect the usb drive.
Posts: 10
Joined: Apr 2012
Reputation:
0
Rod1
Junior Member
Posts: 10
Hi dhead
I confirm that your build for the Blutimes M3 crashes at the same point as other corey builds. Seems to be a problem with component ybrpr output, as it will boot sometimes on HDMI.
The Gotham 13.0 build posted by dreamers works fine, although takes a while to boot. Playback is smooth though, and it seems to be less CPU intensive.
I'm not sure if it's my unit, but I still can't get a stable MAC address and therefore static IP. As this has a 3.5in bay, which would be great as a NAS, the lack of static IP is frustrating.
Posts: 7
Joined: Mar 2014
Reputation:
0
2014-06-16, 15:28
(This post was last modified: 2014-06-17, 15:21 by momokabbaj.)
Hi Dhead and folks,
I don't know why the xios build didn't want to load even though I wiped everything?
It shows an error 7 or something.
Should i revert to android before i load it? or the same as xios official build just by loading it as an update on top of the previous linux build?
Thank you though, crossing my fingers to seeing gotham on the xios
Ps: I noticed that airplay doesn't work yet on gbox gotham latest build, is it a known issue?