Well guys i just spent the last 2 weeks getting this time vampire working... im short on time but this should get you started
You'll need to donate $5 to get SageDCT 2.7.4:
http://babgvant.com/files/folders/limite...21867.aspx
This is your 'driver' which will allow your ceton card to talk to NextPVR, you'll need to set capture method to ffmpeg
you may need the SAF v6.2.3 ffmpeg codec:
http://hobring.esero.net/saf/binary/
one you have that, install nextpvr and then you'll need the networkrecorder.dll plugin:
http://www.nextpvr.com/nwiki/pmwiki.php?...rkRecorder
There is a pdf instruction guide that will help you through setting that up... ultimatly i found that i needed an 9000 delay for my card, (7000-8000 may work too... haven't tested) here is what my xml looks like (i changed the ports for each tuner in sagedct to match the xml):
Code:
<?xml version="1.0"?>
<Settings>
<PluginSettings>
<NetworkRecorder id="22" instance="1">
<FriendlyName>InfiniTV1</FriendlyName>
<host>127.0.0.1</host>
<port>6971</port>
<delay>9000</delay>
</NetworkRecorder>
</PluginSettings>
<PluginSettings>
<NetworkRecorder id="23" instance="2">
<FriendlyName>InfiniTV2</FriendlyName>
<host>127.0.0.1</host>
<port>6972</port>
<delay>9000</delay>
</NetworkRecorder>
</PluginSettings>
<PluginSettings>
<NetworkRecorder id="24" instance="3">
<FriendlyName>InfiniTV3</FriendlyName>
<host>127.0.0.1</host>
<port>6973</port>
<delay>9000</delay>
</NetworkRecorder>
</PluginSettings>
<PluginSettings>
<NetworkRecorder id="25" instance="4">
<FriendlyName>InfiniTV4</FriendlyName>
<host>127.0.0.1</host>
<port>6974</port>
<delay>9000</delay>
</NetworkRecorder>
</PluginSettings>
<PluginSettings>
<NetworkRecorder id="26" instance="5">
<FriendlyName>InfiniTV5</FriendlyName>
<host>127.0.0.1</host>
<port>6975</port>
<delay>9000</delay>
</NetworkRecorder>
</PluginSettings>
<PluginSettings>
<NetworkRecorder id="27" instance="6">
<FriendlyName>InfiniTV6</FriendlyName>
<host>127.0.0.1</host>
<port>6976</port>
<delay>9000</delay>
</NetworkRecorder>
</PluginSettings>
</Settings>
once nextpvr detects your 'network recorder' devices, be sure to disable the IPTV devices and move them down to the bottom priority
after that you need to go into kodi, enable the nextpvr addon using your host as the address 127.0.0.1, then enable live tv... there are some docs on that... again, sorry for the quick and dirty here... short on time today